How To Draw A Star In Autocad

Hither are two new Bones AutoCAD commands well to master.

POLYGON is non a command that is beingness used ofttimes just information technology tin can come up in handy at times, this control can help draw a star in AutoCAD. In that location is a technique that requires y'all to make use of this command to describe a star in AutoCAD.

The SCALE control Enlarges or reduces the object's size, keeping their proportions the same after scaling.

POLYGON

The polygon command allows creating polygons in AutoCAD

To create a polygon, you need to specify the number of sides of your polygon when you lot are creating it, the center of the polygon and whether the polygon will be inscribed or circumscribed to a circumvolve which you will specify the radius.

To create a polygon

Write POLYGON and Press Enter
Enter the number of sides and Press Enter
Specify the center of the polygon
Enter an option: I (for inscribed) and C (for Circumscribed). It is fix to <I> by default. Simply pressing Enter in this footstep volition activate I
Specify the radius of the circumvolve

Pay attention to the control window while following the above procedure, y'all tin can detect in step 3, that in that location is an option that will permit you specify the length of a side of the Polygon instead of Middle of Circumvolve and Radius. Since all sides of a polygon take the same length, yous might desire to use this feature to create a polygon, and this second choice will be the ane to use.

As I was saying before, polygons tin help you create a star in AutoCAD. Joining corners and trimming could help create a totally different set of objects

SCALE IN AutoCAD

The Calibration command is often used to increment or subtract the size of an object, and it is more often than not used when an object is inserted into your project and need to fit the scale of the electric current project.

To utilize the Scale command in AutoCAD

Type Scale and press Enter
Select objects and press Enter
Specify base of operations point
Specify the scale factor and press Enter

The scale factor can be 2 if y'all wish to double the size of the selected object or can be 0.5 if you wish to reduce the size past 2. (These are merely examples of calibration factors)